Garden Patio Pavers Calculator: Slabs, Sub-Base & Cost
A garden patio is one of the most valuable outdoor spaces a home can have. It extends the living area, provides a place for eating, entertaining, and relaxing, and — if designed and installed correctly — will last for decades. But a patio is not “just pavers on the ground”. It is a layered system: pavers on bedding sand, on a compacted sub-base, on the sub-grade soil. Each layer has a job, and getting any of them wrong leads to the classic patio failure modes: settlement, weeds, standing water, and a surface that starts to look tired within a few years instead of the 20+ years a proper installation delivers.
Our Garden Patio Pavers Calculator takes the guesswork out of patio design. It estimates paver count, sub-base order volume and mass in tonnes, bedding sand volume, jointing material, geotextile, edge restraints, labour, delivery, VAT and total installed cost. It also checks the sub-base depth against the recommended depth for the intended use — footpath, patio, or occasional light vehicle — because a sub-base that works for a path will fail under a garden bench with a cast-iron base.
In this guide, we will show you how to use the calculator, explain each input and output, walk through six real-world examples, and answer eight of the most frequently asked questions about garden patio pavers.
Garden Patio Pavers
Construction CalculatorGarden patio pavers: pavers, sub-base, bedding sand, jointing, geotextile and cost.
What is the Garden Patio Pavers Calculator?
The Garden Patio Pavers Calculator is a free online tool that estimates the materials and costs of a garden patio. It supports:
- Use type: footpath, patio / pedestrian, or occasional light vehicle.
- Paver types: concrete block paving, concrete slabs, natural stone, porcelain, and clay brick.
- Paver sizes: 200 × 100 mm, 200 × 200 mm, 300 × 300 mm, 400 × 400 mm, and custom.
- Sub-base: MOT Type 1 or Type 3, with user-defined depth and compaction allowance.
- Bedding sand: with user-defined depth and compaction.
- Jointing: kiln-dried sand, polymeric sand, resin, mortar, or none.
- Geotextile membrane: recommended as standard.
- Edge restraints: optional perimeter edging.
- Pricing: paver price per m², sub-base per m³, sand per m³, joint per m², geotextile per m², edge per metre, labour per m², delivery, VAT.
The output includes:
- Patio area, area with waste, perimeter
- Pavers per m² and total paver count
- Sub-base order volume (with compaction) and mass in tonnes
- Depth check against use-type recommendation
- Bedding sand order volume and mass in tonnes
- Geotextile area (with 10% overlap)
- Itemised costs: pavers, sub-base, bedding, jointing, geotextile, edge, labour, delivery
- VAT and grand total
The tool is part of a suite of materials and quantities calculators available on our website. For related calculations, you can use our Block Paving Driveway Calculator, Grass / Gravel Pavers Calculator, Paving Patio Calculator, and Pool Deck Paving Calculator.
Why Accurate Patio Pavers Estimation Matters
A garden patio is a permanent improvement. Unlike a flower bed or a shed, once it is laid it is difficult and expensive to change. Getting the quantities and specification right matters not just for cost but for the long-term performance of the patio.
Settlement and Load Distribution
The sub-base carries the load. For a pedestrian patio, 100 mm of compacted MOT Type 1 is usually sufficient. For a footpath, 75 mm is adequate. For an occasional light vehicle (say, a car parked on the patio for a garden party), 150 mm is better. Too thin a sub-base causes the pavers to settle differentially — some sink, some stay level — and the patio quickly looks uneven.
Drainage and Standing Water
A patio must drain. Water must not pond on the surface or in the joints. The sub-base must be permeable enough (or sloped enough) to evacuate water quickly. The geotextile membrane prevents fines migrating upward, which would eventually clog the sub-base and cause standing water. Jointing material — kiln-dried sand, polymeric sand, or resin — determines how quickly water permeates the surface and how long the joints last.
Weed Growth
Weeds grow through the joints. Kiln-dried sand is porous and permeable, but it also allows weeds. Polymeric sand is more resistant, and resin jointing is virtually weed-free. Mortar pointing resists weeds but cracks with movement.
Longevity
A properly constructed patio with 100 mm sub-base, geotextile, 30 mm bedding, quality pavers, and polymeric or resin jointing will last 20+ years with routine maintenance. A poorly constructed one — thin sub-base, no geotextile, kiln-dried sand, poor compaction — will develop weeds, settlement, and standing water within 3–5 years.
Cost Accuracy
Patios are relatively small — typically 10–30 m² — so a 20% error in quantities is small in absolute terms. But the cumulative effect of pavers + sub-base + bedding + jointing + geotextile + edging + labour + VAT can easily reach $2,000–$8,000 for a modest patio. Accurate estimation avoids over-ordering pallets you cannot return and under-ordering mid-project.
Compliance and Planning
If the patio is over a certain size, or if it requires SUDS compliance, or if it is within a conservation area, planning permission may be required. Using permeable construction — permeable pavers, open-graded sub-base, geotextile — helps demonstrate compliance.
For more information on patio design, you can refer to Wikipedia’s article on patios or the Interpave guidance.
How to Use the Garden Patio Pavers Calculator
Using the calculator is straightforward. Here is a breakdown of each field.
1. Dimensions
- Patio length: Enter the length in meters or feet.
- Patio width: Enter the width in meters or feet.
- Waste allowance: Enter a percentage for waste. 10% is typical; diagonal or curved layouts may require 15%.
2. Use
- Intended use: Select footpath, patio, or occasional light vehicle. This determines the recommended sub-base depth (75, 100, or 150 mm).
3. Paver
- Paver type: Select concrete block, concrete slab, natural stone, porcelain, or clay brick. Natural stone and porcelain require more skill to lay; the calculator applies a labour difficulty factor.
- Paver size: Select 200 × 100 mm, 200 × 200 mm, 300 × 300 mm, 400 × 400 mm, or custom.
- Custom width/length: Used only when “Custom size” is selected.
4. Sub-base
- Sub-base depth: Enter the installed depth in meters or inches. 75 mm for footpath, 100 mm for patio, 150 mm for light vehicle use.
- Sub-base compaction: Enter the compaction allowance, typically 10–15%. This is added to order volume.
- Sub-base material: MOT Type 1 (crushed, 2.25 t/m³) or Type 3 (open-graded, 2.10 t/m³).
5. Bedding
- Bedding sand depth: Typically 30 mm. Do not exceed 40 mm.
- Bedding compaction: Typically 10%.
6. Jointing
- Jointing: Kiln-dried sand, polymeric sand, resin, mortar, or none. Polymeric and resin are more expensive but last longer.
7. Geotextile
- Geotextile membrane: Recommended as standard. The calculator adds 10% overlap.
8. Edging
- Edge restraint length: Total edge length. For a rectangular patio, 2 × (length + width). Set 0 if no edging.
9. Pricing
Enter local prices for each component. Leave 0 to skip.
10. Tax
- VAT / tax rate: Enter the applicable rate, or 0 if not applicable.
Once you enter all values, the calculator displays the full output: areas, paver count, sub-base and bedding volumes and masses, geotextile area, depth check, itemised costs, and total.
Understanding the Calculations
To make the most of the calculator, it is important to understand each output and the underlying formulas.
Pavers Per m²
Pavers per m² = 1 / (width × length).
Examples:
- 200 × 100 mm → 50.0 pcs/m²
- 200 × 200 mm → 25.0 pcs/m²
- 300 × 300 mm → 11.11 pcs/m²
- 400 × 400 mm → 6.25 pcs/m²
Paver Count
Pavers = ceil(area with waste × pavers per m²).
Sub-base Volume and Mass
installed_vol = area × sub-base depth.
order_vol = installed_vol × (1 + compaction / 100).
mass = installed_vol × density.
Densities:
- MOT Type 1: 2.25 t/m³
- MOT Type 3: 2.10 t/m³
Depth Check
Recommended sub-base depth by use:
- Footpath: 75 mm
- Patio: 100 mm
- Occasional light vehicle: 150 mm
If the entered depth is more than 5 mm below the recommendation, a warning is shown.
Bedding Sand
installed_vol = area × bed depth.
order_vol = installed_vol × (1 + compaction / 100).
mass = installed_vol × 1.60 t/m³ (damp sand).
Jointing
jointing cost = area × price per m².
Geotextile
geo_area = area × 1.10 (10% overlap).
geo_cost = geo_area × price per m².
Edging
edge cost = edge length × price per metre.
Labour
labour cost = area × labour rate × difficulty factor.
Difficulty factors:
- Concrete block: 1.00
- Concrete slab: 1.10
- Natural stone: 1.30
- Porcelain: 1.35
- Clay brick: 1.15
VAT and Total
VAT = subtotal × VAT / 100.
Total = subtotal + VAT.
Understanding these components helps you interpret the results and adjust your order. For more information on patio design, you can refer to Wikipedia’s article on patios or the Interpave guidance.
Reference Table of Common Paver Sizes
| Paver size | Pavers per m² | Typical use |
|---|---|---|
| 200 × 100 mm | 50.0 | Block paving (standard) |
| 200 × 200 mm | 25.0 | Block paving, larger format |
| 300 × 300 mm | 11.11 | Slabs, patios |
| 400 × 400 mm | 6.25 | Large slabs, patios |
| Custom | Calculated | Bespoke |
Example Calculations
Let’s run through six examples across different patio types.
Example 1: Small Garden Patio, 15 m², Concrete Block
Inputs:
- Length: 5 m, width: 3 m
- Waste: 10%
- Use: Patio
- Paver: Concrete block, 200 × 100 mm
- Sub-base: Type 1, 100 mm, compaction 12%
- Bed: 30 mm, compaction 10%
- Jointing: Kiln-dried sand
- Geotextile: Yes
- Edging: 16 m
- Prices: paver $22/m², sub-base $55/m³, sand $55/m³, joint $4/m², geo $1.80/m², edge $10/m, labour $30/m², delivery $80, VAT 0%
Calculations:
- Area = 15 m²; waste 10% → 16.5 m²
- Perimeter = 16 m
- Pavers per m² = 50; pavers = 825
- Paver cost = 16.5 × $22 = $363
- Sub-base installed = 15 × 0.10 = 1.5 m³
- Sub-base order = 1.5 × 1.12 = 1.68 m³
- Sub-base mass = 1.5 × 2.25 = 3.375 t
- Sub-base cost = 1.68 × $55 = $92.40
- Depth OK (100 mm vs 100 mm)
- Bedding installed = 15 × 0.03 = 0.45 m³
- Bedding order = 0.495 m³
- Bedding mass = 0.45 × 1.60 = 0.72 t
- Bedding cost = 0.495 × $55 = $27.23
- Joint cost = 15 × $4 = $60
- Geotextile = 16.5 × $1.80 = $29.70
- Edge cost = 16 × $10 = $160
- Labour = 15 × $30 × 1.00 = $450
- Delivery = $80
- Subtotal = $1,262.33
- Total (VAT 0%) = $1,262.33
Example 2: Patio with Porcelain Slabs, 24 m²
Inputs:
- Length: 6 m, width: 4 m → 24 m²
- Waste 10% → 26.4 m²
- Paver: Porcelain, 400 × 400 mm
- Sub-base: Type 1, 100 mm, compaction 12%
- Bed: 30 mm, compaction 10%
- Jointing: Resin
- Geotextile: Yes
- Edging: 20 m
- Prices: paver $40/m², sub-base $55/m³, sand $55/m³, joint $14/m², geo $2.50/m², edge $12/m, labour $40/m², delivery $150, VAT 20%
Calculations:
- Pavers per m² = 6.25; pavers = 165
- Paver cost = 26.4 × $40 = $1,056
- Sub-base installed = 2.4 m³; order = 2.688 m³; mass = 5.4 t; cost = $147.84
- Depth OK
- Bedding installed = 0.72 m³; order = 0.792 m³; mass = 1.15 t; cost = $43.56
- Joint = 24 × $14 = $336
- Geotextile = 26.4 × $2.50 = $66
- Edge = 20 × $12 = $240
- Labour = 24 × $40 × 1.35 = $1,296
- Delivery = $150
- Subtotal = $3,335.40
- VAT = $667.08
- Total = $4,002.48
Example 3: Natural Stone Patio, 30 m²
Inputs:
- Length: 6 m, width: 5 m → 30 m²
- Waste 10% → 33 m²
- Paver: Natural stone, 300 × 300 mm
- Sub-base: Type 1, 100 mm, compaction 12%
- Bed: 30 mm, compaction 10%
- Jointing: Polymeric sand
- Geotextile: Yes
- Edging: 22 m
- Prices: paver $55/m², sub-base $55/m³, sand $60/m³, joint $8/m², geo $2/m², edge $12/m, labour $45/m², delivery $150, VAT 20%
Calculations:
- Pavers per m² = 11.11; pavers = 367
- Paver cost = 33 × $55 = $1,815
- Sub-base installed = 3.0 m³; order = 3.36 m³; mass = 6.75 t; cost = $184.80
- Bedding installed = 0.9 m³; order = 0.99 m³; cost = $59.40
- Joint = 30 × $8 = $240
- Geotextile = 33 × $2 = $66
- Edge = 22 × $12 = $264
- Labour = 30 × $45 × 1.30 = $1,755
- Delivery = $150
- Subtotal = $4,534.20
- VAT = $906.84
- Total = $5,441.04
Example 4: Footpath with Small Slabs, 6 m²
Inputs:
- Length: 6 m, width: 1 m → 6 m²
- Waste 15% (path with cuts) → 6.9 m²
- Paver: Concrete slab, 300 × 300 mm
- Use: Footpath
- Sub-base: Type 1, 75 mm, compaction 12%
- Bed: 30 mm, compaction 10%
- Jointing: Kiln-dried sand
- Geotextile: Yes
- Edging: 14 m
- Prices: paver $25/m², sub-base $55/m³, sand $55/m³, joint $4/m², geo $1.80/m², edge $10/m, labour $32/m², delivery $50, VAT 20%
Calculations:
- Pavers per m² = 11.11; pavers = 77
- Paver cost = 6.9 × $25 = $172.50
- Sub-base installed = 0.45 m³; order = 0.504 m³; mass = 1.01 t; cost = $27.72
- Depth OK (75 mm vs 75 mm)
- Bedding installed = 0.18 m³; order = 0.198 m³; cost = $10.89
- Joint = 6 × $4 = $24
- Geotextile = 6.9 × $1.80 = $12.42
- Edge = 14 × $10 = $140
- Labour = 6 × $32 × 1.10 = $211.20
- Delivery = $50
- Subtotal = $648.73
- VAT = $129.75
- Total = $778.48
Example 5: Large Patio with Light Vehicle Access, 40 m²
Inputs:
- Length: 8 m, width: 5 m → 40 m²
- Waste 10% → 44 m²
- Use: Light vehicle
- Paver: Concrete block, 200 × 100 mm
- Sub-base: Type 1, 150 mm, compaction 15%
- Bed: 30 mm, compaction 10%
- Jointing: Polymeric sand
- Geotextile: Yes
- Edging: 26 m
- Prices: paver $22/m², sub-base $55/m³, sand $55/m³, joint $6/m², geo $2/m², edge $10/m, labour $32/m², delivery $150, VAT 20%
Calculations:
- Pavers = 2,200
- Paver cost = 44 × $22 = $968
- Sub-base installed = 6.0 m³; order = 6.90 m³; mass = 13.5 t; cost = $379.50
- Depth OK (150 mm vs 150 mm)
- Bedding installed = 1.2 m³; order = 1.32 m³; cost = $72.60
- Joint = 40 × $6 = $240
- Geotextile = 44 × $2 = $88
- Edge = 26 × $10 = $260
- Labour = 40 × $32 × 1.00 = $1,280
- Delivery = $150
- Subtotal = $3,438.10
- VAT = $687.62
- Total = $4,125.72
Example 6: Depth Warning Case
Same as Example 1, but user enters 50 mm sub-base for patio use. Calculator shows:
- Depth warning: “Below 100 mm recommended for patio”
- Sub-base volume drops accordingly, but the warning tells the user the design is likely to fail.
This is one of the most useful features — it catches a design mistake before excavation starts.
Benefits of Using the Garden Patio Pavers Calculator
Tips for Accurate Patio Paver Estimation
- Measure the patio accurately. For irregular shapes, divide into rectangles and sum them.
- Allow proper waste. 10% for rectangular layouts; 15% for diagonal or curved patterns.
- Choose the right use type. Footpath 75 mm; patio 100 mm; light vehicle 150 mm. Under-depth is the most common cause of settlement.
- Choose the right paver type for the exposure. Natural stone in shaded gardens may remain damp; porcelain is more resistant. Concrete block is the cheapest durable option.
- Never skip geotextile. Cheap and essential.
- Allow for compaction. Order 10–15% more than installed volume.
- Do not over-bed the pavers. 30 mm is standard; more than 40 mm reduces stability.
- Choose the right jointing. Kiln-dried sand is cheapest but requires frequent topping up. Polymeric and resin last much longer.
- Consider drainage. A patio should slope away from the house at 1:60–1:80 to shed surface water.
- Include edge restraints. Edging holds the paver field in place and gives a clean finish.
- Plan delivery access. Bulk bags are heavy — ensure access and lifting.
- Verify with a professional. For large or complex patios, have a landscaper or paving contractor verify the design.
For more information on patio design, you can refer to Wikipedia’s article on patios or the Interpave guidance.
Common Mistakes to Avoid
- Underestimating the sub-base. Sub-base is a significant material cost and the most common point of failure.
- Using the wrong use type. A patio designed for pedestrians will settle under occasional vehicle load.
- Skipping geotextile. Saves $20 and costs thousands in premature failure.
- Too much bedding sand. More than 40 mm reduces stability.
- Ignoring compaction. Loose material settles 10–15%; without allowance, you will run short.
- Wrong jointing. Kiln-dried sand is cheap but washes out; polymeric and resin last much longer.
- No edge restraints. The paver field spreads under load.
- No drainage slope. A flat patio traps water and ponds on the surface.
- No waste allowance. Diagonal and curved patterns need 15%, not 10%.
- No VAT. 20% VAT significantly changes the total cost.
How to Reduce Patio Paver Costs
If your estimate is higher than expected, here are ways to reduce costs without compromising quality:
- Choose concrete block over natural stone or porcelain. Concrete is 30–50% cheaper and perfectly durable.
- Use a smaller paver size. 200 × 100 mm block is cheaper per m² than 400 × 400 mm slabs.
- Choose kiln-dried sand jointing over polymeric or resin. Cheaper upfront.
- Use MOT Type 1 if drainage is not critical. Type 3 is more permeable but costs more.
- Reduce the edge restraint length. Only edge where required by the design.
- Do the excavation yourself. Digging is labour-intensive.
- Compare suppliers. Bulk materials prices vary 20–30%.
- Time the project well. Avoid peak landscaping season.
- Get multiple quotes. Always compare at least three contractors for installation.
- Consider DIY. Patios are manageable for a competent DIYer if the sub-base is prepared correctly.
Frequently Asked Questions (FAQ)
Conclusion
The Garden Patio Pavers Calculator is an essential tool for homeowners, landscapers, paving contractors, and designers. It estimates paver count, sub-base order volume (with compaction), sub-base mass in tonnes, bedding sand volume and mass, geotextile area, edge restraints, jointing, labour, delivery, VAT and total installed cost — with a use-type depth check that catches design mistakes early.
Whether you are building a small garden patio, a formal entertaining space, or a light vehicle access area, accurate estimation of patio paving materials is the foundation of a durable, drainage-safe, and cost-effective installation. Try the Garden Patio Paver Calculator today and take the guesswork out of your patio project.

3 Comments