Attic Insulation Calculator 2026: Packs, R-Value & Total Cost
Loft insulation is the highest-return energy efficiency measure a homeowner can make. Heat rises, and an uninsulated loft lets 25–35% of a home’s heating escape through the roof. The payback is measured in one to three heating seasons, and the improvement to comfort is immediate. Yet most loft insulation installations are specified by rule of thumb — “300 mm of mineral wool” — without checking the R-value, without calculating the packs accurately, and without accounting for the raised decking that most lofts need if the insulation exceeds joist depth.
Our Attic Insulation Calculator is a free online tool that estimates the materials and costs of a loft insulation installation. It calculates loft area with waste, packs required from pack coverage, R-value from insulation type and thickness, insulation mass, raised decking (forced when thickness exceeds joist depth), eaves ventilation, labour with type-specific multipliers, delivery, VAT and cost per m². It also flags three common design errors — R-value below the UK recommendation, insufficient joist clearance without raised decking, and blown-in insulation specified from packs — before the materials are ordered.
In this guide, we will show you how to use the calculator, explain each input and output, walk through six examples across insulation types and lofts, and answer eight of the most frequently asked questions about loft insulation.
Attic Insulation
Construction CalculatorAttic / loft insulation: area, packs, R-value, joist clearance, ventilation and cost.
What is the Attic Insulation Calculator?
The Attic Insulation Calculator is a free online tool that estimates the quantity and cost of materials for a loft insulation installation. It supports:
- Loft dimensions: length × width.
- Joist depth: used to determine when insulation exceeds the joist height and raised decking is required.
- Insulation types: mineral wool roll, mineral wool slab, blown-in loose fill, sheep wool, wood fibre — each with its own λ, density and labour multiplier.
- Insulation thickness: typically 270–300 mm for UK compliance.
- Pack coverage: m² per pack at the chosen thickness.
- Waste allowance: typically 5% for rectangular lofts.
- Raised decking: optional or forced.
- Eaves ventilation: linear metres of vent at the eaves.
- Pricing: pack price, decking per m², vent per metre, labour per m², delivery, VAT.
The output includes:
- Loft area and area with waste
- Packs required
- Insulation mass in kg
- R-value in m²K/W
- Raised decking area (when required)
- Design check warning
- Itemised costs: insulation, decking, ventilation, labour, delivery
- VAT, grand total and cost per m²
The tool is part of a suite of insulation calculators available on our website. For related calculations, you can use our Cavity Wall Insulation Calculator, External Wall Insulation Calculator, Floor Insulation Calculator, and Loft Roll Insulation Calculator.
Why Accurate Attic Insulation Estimation Matters
Loft insulation is cheap per m², but the specification matters far more than the material cost. Getting it wrong leads to either insufficient thermal performance, structural problems, or a loft you cannot use.
R-Value Is the Real Measure
Thickness alone tells you nothing about thermal performance. The thermal resistance (R-value) is the thickness divided by the thermal conductivity (λ) of the material. A 270 mm mineral wool roll has an R-value of about 6.14 m²K/W; a 270 mm wood fibre board has about 7.11 m²K/W. Both are the same thickness — but the wood fibre performs better. UK building regulations for loft insulation target an R-value of at least 6.0 m²K/W (corresponding to a U-value of about 0.16 W/m²K). The calculator computes R-value from thickness and λ, and warns when it falls below 6.0.
Joist Depth Determines Whether You Can Walk on It
Loft joists are typically 100 mm deep. If you install 270 mm of insulation, it sits 170 mm above the joist top — which means you cannot walk on the loft floor. Raised decking, supported by additional timbers or proprietary loft legs, is required to create a usable floor above the insulation. The calculator checks whether the thickness exceeds joist depth and adds raised decking automatically if it does. It also warns when the user has not requested decking but the insulation exceeds joist depth — because the decking is physically necessary even if the user did not think of it.
Blown-In Insulation Is a Specialist Job
Blown-in loose fill insulation is installed by a specialist with a blowing machine, not from packs. It is sold by volume or mass, and the labour cost is much higher than mineral wool rolls. The calculator applies a 1.5× labour multiplier for blown-in insulation and warns that the estimate is approximate — because a full blown-in installation is quoted by the specialist, not calculated from pack coverage.
Mass Matters for Structural Load
Insulation mass is significant on a loft floor. Mineral wool roll at 20 kg/m³ and 270 mm thickness weighs about 5.4 kg/m². Mineral wool slab at 60 kg/m³ and the same thickness weighs 16.2 kg/m². On a 100 m² loft, the difference is over one tonne. The calculator outputs total insulation mass in kg, so you can check the joist load capacity.
Ventilation Prevents Condensation
Eaves ventilation keeps the roof space dry. Without adequate ventilation, warm moist air from the house rises into the loft, condenses on cold roof surfaces, and causes rot, mould, and insulation damage. The calculator includes eaves ventilation as a linear-metre cost.
Labour Varies by Insulation Type
Laying mineral wool rolls is quick. Laying mineral wool slabs takes longer because they are heavier and denser. Blown-in insulation takes much longer because it requires the specialist and their equipment. Sheep wool and wood fibre are slower than mineral wool rolls because they are more difficult to cut precisely. The calculator applies type-specific labour multipliers so the estimate reflects the actual installation.
VAT and Delivery
Insulation packs are bulky but light — a full loft of rolls can fit in a van. Delivery and VAT still add real cost to the final bill.
For more information on loft insulation, you can refer to Wikipedia’s article on building insulation or the Energy Saving Trust.
How to Use the Attic Insulation Calculator
Using the calculator is straightforward. Here is a breakdown of each field.
1. Attic
- Loft length / width: Enter dimensions in meters or feet.
- Joist depth: Enter the depth of the ceiling joists. Typically 100 mm for traditional lofts; 150 mm or more for newer construction.
2. Insulation
- Insulation type: Mineral wool roll (λ 0.044), mineral wool slab (λ 0.035), blown-in (λ 0.042), sheep wool (λ 0.040), or wood fibre (λ 0.038). Type affects R-value, mass and labour.
- Thickness: Typically 270–300 mm for UK compliance. Set the thickness to match the desired R-value.
3. Pack
- Pack coverage: m² per pack at the chosen thickness. Check the packaging — this varies with thickness and product.
- Waste allowance: 5% for rectangular lofts; 10% for irregular lofts with dormers or chimneys.
4. Accessories
- Raised decking: Yes or no. The calculator forces decking when the thickness exceeds joist depth.
- Eaves length: Total length of eaves in meters or feet. Usually equals the roof perimeter.
5. Pricing
Enter local prices for each component. Leave 0 to skip.
6. Extras
- Delivery / skip: Fixed cost for delivery and waste removal.
- VAT / tax rate: Applicable rate, or 0 if not applicable.
Once you enter all values, the calculator displays the full output, including area, packs, mass, R-value, decking area, design check, itemised costs, VAT, total and cost per m².
Understanding the Calculations
To make the most of the calculator, it is important to understand each output and the underlying formulas.
Area and Waste
area = length × width.
area_waste = area × (1 + waste / 100).
5% is typical for rectangular lofts; 10% for lofts with dormers, chimneys, or irregular shapes.
Packs
packs = ceil(area_waste / pack coverage).
The result is rounded up — you cannot buy partial packs.
Insulation Mass
mass_kg = area × thickness × density.
Densities:
- Mineral wool roll: 20 kg/m³
- Mineral wool slab: 60 kg/m³
- Blown-in loose fill: 30 kg/m³
- Sheep wool: 25 kg/m³
- Wood fibre: 50 kg/m³
A 270 mm loft of mineral wool roll weighs 5.4 kg/m²; mineral wool slab weighs 16.2 kg/m².
R-Value
R = thickness (m) / λ (W/m·K).
λ values:
- Mineral wool roll: 0.044
- Mineral wool slab: 0.035
- Blown-in: 0.042
- Sheep wool: 0.040
- Wood fibre: 0.038
Examples:
- 270 mm mineral wool roll: R = 0.270 / 0.044 = 6.14
- 300 mm mineral wool roll: R = 0.300 / 0.044 = 6.82
- 270 mm wood fibre: R = 0.270 / 0.038 = 7.11
The calculator warns when R < 6.0 — below the UK recommendation.
Raised Decking
deck_required = (deck == yes) OR (thickness > joist depth).
When thickness exceeds joist depth, decking is physically necessary to maintain a walkable surface. The calculator forces decking and warns when the user has not selected it.
Eaves Ventilation
vent_cost = eaves length × vent price per metre.
Labour
labour_cost = area × labour rate × type multiplier.
Type multipliers:
- Mineral wool roll: 1.00
- Mineral wool slab: 1.05
- Blown-in: 1.50
- Sheep wool: 1.10
- Wood fibre: 1.15
Blown-in is 1.50× because it requires a specialist and blowing equipment.
Design Check
The calculator performs three checks:
- R-value below 6.0.
- Decking forced by thickness but not selected.
- Blown-in type selected.
VAT and Total
VAT = subtotal × VAT / 100.
Total = subtotal + VAT.
Cost per m² = total / area.
Understanding these components helps you interpret the results and adjust your order. For more information on insulation standards, you can refer to the Energy Saving Trust or Wikipedia’s article on building insulation.
Reference Table of Insulation Types
| Type | λ (W/m·K) | Density (kg/m³) | R at 270 mm | Labour |
|---|---|---|---|---|
| Mineral wool roll | 0.044 | 20 | 6.14 | 1.00 |
| Mineral wool slab | 0.035 | 60 | 7.71 | 1.05 |
| Blown-in | 0.042 | 30 | 6.43 | 1.50 |
| Sheep wool | 0.040 | 25 | 6.75 | 1.10 |
| Wood fibre | 0.038 | 50 | 7.11 | 1.15 |
Example Calculations
Let’s run through six examples across insulation types and loft configurations.
Example 1: Standard Loft, 48 m², 270 mm Mineral Wool Roll
Inputs:
- Loft: 8 × 6 m → 48 m²
- Joist depth: 100 mm
- Type: Mineral wool roll
- Thickness: 270 mm
- Pack coverage: 8 m²
- Waste: 5%
- Deck: No
- Eaves: 28 m
- Prices: pack $35, vent $5/m, labour $8/m²
- Delivery: $60
- VAT: 20%
Calculations:
- Area = 48 m²; waste → 50.4 m²
- Packs = ceil(50.4 / 8) = 7
- Insulation cost = 7 × $35 = $245
- Mass = 48 × 0.27 × 20 = 259 kg
- R-value = 0.27 / 0.044 = 6.14 ✓
- Deck: thickness (270) > joist (100) → forced
- Deck cost = 48 × $0 = $0 (price 0 → no cost)
- Vent = 28 × $5 = $140
- Labour = 48 × $8 × 1.00 = $384
- Delivery = $60
- Subtotal = $829
- VAT = $165.80
- Total = $994.80
- Cost per m² = $20.72
- Design: OK (R 6.14, deck forced)
Example 2: Same Loft with Raised Decking Priced
- Deck price: $30/m²
- Deck cost = 48 × $30 = $1,440
- Subtotal = $2,269
- VAT = $453.80
- Total = $2,722.80
- Cost per m² = $56.72
Example 3: Eco Loft, 60 m², 300 mm Wood Fibre
Inputs:
- Loft: 10 × 6 m → 60 m²
- Joist depth: 150 mm
- Type: Wood fibre
- Thickness: 300 mm
- Pack coverage: 5 m²
- Waste: 8%
- Deck: Yes
- Eaves: 32 m
- Prices: pack $95, deck $40/m², vent $6/m, labour $12/m²
- Delivery: $120
- VAT: 20%
Calculations:
- Area = 60 m²; waste → 64.8 m²
- Packs = ceil(64.8 / 5) = 13
- Insulation cost = 13 × $95 = $1,235
- Mass = 60 × 0.30 × 50 = 900 kg
- R = 0.30 / 0.038 = 7.89 ✓
- Deck = 60 × $40 = $2,400
- Vent = 32 × $6 = $192
- Labour = 60 × $12 × 1.15 = $828
- Delivery = $120
- Subtotal = $4,775
- VAT = $955
- Total = $5,730
- Cost per m² = $95.50
Example 4: Blown-In Specialist, 80 m², 300 mm
Inputs:
- Loft: 80 m²
- Type: Blown-in
- Thickness: 300 mm
- Pack coverage: 5 m²
- Deck: Yes
- Prices: pack $40, deck $35/m², vent $6/m, labour $15/m²
- Delivery: $150
- VAT: 20%
Calculations:
- Design warning: “Blown-in insulation is specialist-installed — estimate is approximate”
- R = 0.30 / 0.042 = 7.14 ✓
- Labour = 80 × $15 × 1.50 = $1,800
- Total ≈ $5,260
- Design: blown-in warning
The user sees the warning and knows to get a specialist quote for the actual installation.
Example 5: Insufficient R-Value — Warning
Same as Example 1 but thickness 200 mm:
- R = 0.20 / 0.044 = 4.55
- Design warning: “R-value below 6.0 m²K/W — below UK loft recommendation”
- Cost drops by ~30%, but the floor will not meet regulations.
Example 6: Decking Forced but Not Selected
Same as Example 1 with deck price $30/m² but deck set to “no”:
- Design warning: “Insulation thicker than joist depth — raised decking auto-added”
- Deck cost applied anyway ($1,440)
- User sees the cost and the explanation.
Benefits of Using the Attic Insulation Calculator
Tips for Accurate Attic Insulation Estimation
- Measure the loft accurately. Subtract the area of chimney breasts, tanks, and other obstructions.
- Choose the right type. Mineral wool roll is cheapest; wood fibre and sheep wool are eco alternatives; blown-in is specialist-installed.
- Target R ≥ 6.0. UK recommendation for lofts; some eco standards target higher.
- Confirm pack coverage. Varies with thickness — a 200 mm roll covers more per pack than a 300 mm roll of the same product.
- Allow proper waste. 5% for rectangular lofts; 10% for irregular shapes.
- Check joist depth. If the insulation exceeds joist depth, raised decking is required.
- Include raised decking cost. Not optional if you want to walk on the floor.
- Add eaves ventilation. Keep the roof space dry.
- Check the mass. 60 kg/m³ slab at 300 mm is 18 kg/m² — significant.
- Use the correct labour rate. Blown-in is 1.5× rolls.
- Do not forget delivery and VAT.
- Verify with a professional. For listed buildings or complex roofs, have a surveyor verify.
For more information on loft insulation, you can refer to the Energy Saving Trust or Wikipedia’s article on building insulation.
Common Mistakes to Avoid
- Sizing by thickness only. R-value is what matters — 270 mm of wood fibre outperforms 270 mm of mineral wool roll.
- Forgetting raised decking. Insulation above joist depth means you cannot walk on the floor.
- Choosing blown-in from packs. Blown-in is specialist-installed — the cost estimate will be wrong.
- Blocking eaves vents. Trapped moisture rots the roof structure.
- Underestimating waste. Lofts have obstructions — 5–10% is realistic.
- Ignoring mass on upper floors. Dense slabs at 300 mm are heavy.
- No eaves ventilation. Condensation damages insulation and structure.
- No VAT or delivery. Both significantly change the total bill.
- Choosing by price alone. Cheap insulation performs poorly and may not meet regulations.
- Skipping professional verification. For complex lofts, a surveyor’s report is essential.
How to Reduce Attic Insulation Costs
If your estimate is higher than expected, here are ways to reduce costs without compromising performance:
- Choose mineral wool roll over wood fibre or sheep wool. Cheapest per m², still meets R ≥ 6.0.
- Skip the raised decking if not needed. If you do not need to walk on the loft, insulation at joist level is fine.
- Do the installation yourself. Rolls are straightforward — a competent DIYer can do a rectangular loft in a day.
- Use standard pack sizes. Standard products are cheaper per m² than specialist.
- Compare suppliers. Insulation prices vary 20–30%.
- Order in bulk. Larger orders often qualify for a discount.
- Use the right waste allowance. 5% not 10% for a clean rectangular loft.
- Time the project off-season. Retailers discount in quieter months.
- Get multiple quotes for labour. Compare at least three installers.
- Verify VAT treatment. Energy-saving materials may have reduced VAT in some jurisdictions.
Frequently Asked Questions (FAQ)
Conclusion
The Attic Insulation Calculator is an essential tool for homeowners, installers, and specifiers. It estimates packs, R-value, insulation mass, raised decking, eaves ventilation, labour with type multipliers, delivery, VAT and total cost per m² — with design warnings for low R-value, forced decking, and blown-in insulation.
The corrected calculator now uses the insulation type to compute R-value (λ), mass (density), and labour time — so the estimate reflects the actual product, not just the thickness. Whether you are insulating a standard loft with mineral wool roll or specifying a wood fibre eco loft, accurate estimation of materials and thermal performance is the foundation of a compliant, efficient, and durable installation. Try the Attic Insulation Calculator today and take the guesswork out of your loft project.

6 Comments